Основной контент книги Using the Engineer's Lathe in Clockmaking
Tekst

Maht 150 lehekülgi

0+

Using the Engineer's Lathe in Clockmaking

€22,49

Raamatust

This book is a practical guide to selecting, setting up and using an engineer's lathe to create parts specifically for clockmaking or clock repairs. It begins as an instructional manual and consequently the first chapter assumes that the reader does not yet have a lathe and needs advice on choosing one. With over 160 diagrams and photographs, topics include: choosing and setting up the lathe; turning – materials and facing; boring and milling techniques; chucks, collets and face-plates; creating a height-centring gauge; pivots, wheels and pinions; removing and mounting gear wheels; fly cutters; making a flat depthing tool and, finally, creating centre marking tools. The intent is to provide a gentle learning curve for the practical use of the lathe.

Žanrid ja sildid

Logi sisse, et hinnata raamatut ja jätta arvustus
Raamat Laurie Penman «Using the Engineer's Lathe in Clockmaking» — loe tasuta raamatu katkendit veebis. Jäta kommentaare ja arvustusi, hääleta lemmikute poolt.
Vanusepiirang:
0+
Ilmumiskuupäev Litres'is:
27 august 2024
Objętość:
150 lk
ISBN:
9780719831522
Õiguste omanik:
Bookwire
Mustand, helivorming on saadaval
Keskmine hinnang 5, põhineb 38 hinnangul
Mustand
Keskmine hinnang 4,4, põhineb 21 hinnangul
Audio
Keskmine hinnang 4,2, põhineb 865 hinnangul
Mustand
Keskmine hinnang 4,8, põhineb 211 hinnangul
Audio
Keskmine hinnang 4,6, põhineb 952 hinnangul
Tekst
Keskmine hinnang 5, põhineb 34 hinnangul
Tekst, helivorming on saadaval
Keskmine hinnang 4,7, põhineb 645 hinnangul
Tekst, helivorming on saadaval
Keskmine hinnang 4,7, põhineb 7051 hinnangul
Tekst
Keskmine hinnang 0, põhineb 0 hinnangul